
References
In this section you will find a selection of our projects, with photographs and descriptions.
You can search by selecting one or more of the following criteria: geographical macro area, typology of project, geographical area (state, region or province).
MACRO AREA
- Italy
- Foreign countries
TYPOLOGY
- Major projects
- Marina and mooring points
- River and lake landings
- Floating piers
- Floating breakwaters
- Floating platforms
- Fixed piers and docks
- Floating bridges
- Water sport centres
- Slipways
- Special structures
- Plant
AREA
- Italy
- Foreign countries
More than 14000m2 of all concrete floating pontoons, fingers, platforms. Prestigious marina with up to 6m wide pontoons and up to 60m long fingers, berths for up to 130m long vessels.
Supply and installation of 6no. floating breakwaters with dim. 20x6m (freeboard 0.8m) and 1no. floating pier 20x6m for the relaunching of the tourist and commercial activity of Cala Balbiano harbour. The connection of the floating modules is through various types of walkways with portal.
6m wide floating breakwaters for fishery dhow and skiff boats mooring. The landing is accessible thanks to 22m long gangways, designed to bear 500kg/m2.
New harbour shelterd by 240m + 180m of monolotic elements of floating breakwaters with dimension 20x8m (150t) and 20x10m (180t). Inside, 1200m of all concrete floating pontoons, 2.4m wide, with tropical hardwood decking, are installed for boat berthing of local nautical centers.
Marina able to accommodate 562 boats from 7.5 to 40m in length. Layout consisting of two floating piers made of monolithic concrete elements 5m wide and discontinuous floating elements 2.5m wide with steel frame and tropical wooden decking for a total development of 850m.
Supply of 43 all cocncrete floating pontoons of dimensions 12x3m with WPC (Wood Palstic Composite) decking to complete the Santiago Calatrava project for berths up to 36m long,The marina todayhas nearly 1000 berths over a surface area of about 340.000sm.
6 km of all-concrete finger and pontoons, anchored with over 300 steel piles, creating 400 berths for boats up to 40m
A modern marina with 120 berths for yachts from 8m up to 32m moored to 500m of floating pontoons 2,5m and 3m wide. The pontoons are anchored with driven piles and the boats moor along the fingers. A large floating platform acts as focal point of the marina a giving access to the largest berths.
Tourist port with capacity of 320 for boats up to 25 m, consisting of floating pontons and piers anchored with steel piles drived into the tuff rock. Quay paved with tropical timber, the same as on the floating structures. Double terminal pump out system.
Tourist port composed of 2250 m of floating pontoos and piers from 1,6 to 4 m wide, all anchored with steel piles. The structures are characterised with 300kg/sqm overload and freeboard between 0,6 and 0,8 m. There are 316 catways up to 1,4 m wide for mooring of the vessels up to 21 m long.
1500 ml of floating piers 4 m wide and floating pontoons 3 m and 2,5 m wide; 1850 ml of catway from 1 to 2, m wide. All anchored with steel piles.
7000 square meters of floating pontoons and finger with aluminum alloy frames, concrete floaters and wooden deckings.
Supply from 2006 to 2019 of floating pontoons and floating breakwater for 300 berths from 10 up to 35m lenght for the water hub in Venice lagoon. Mooring system with fingers and dolphin mooring. Floating pontoons anchored with piles.
2001 - Tourist redevelopment of the Porto Antico achieved by installation of floating pontoons, gangways and service floating structures.
2012 - Floating structures restyling and extension.
240m of floating breakwater 3m and 4m wide, 364m of FE/IG/R H 2,35m wide floating pontoons to obtain up to 300 berths. Anchoring system with chains and concrete mooring blocks.
Touristic harbour for 650 berths on all-concrete floating pontoons 3m wide. The vessels mooring systme emply catway and dolphin mooring.
Turn key supply of 1850m of continuous floating pontoon 3m wide with fingers and anchoring piles for berth from 7m to 25m.
Turn key project with 1605 metres of continuous floating pontoons 3m wide. Reinforced frame, free board 60 cm, overload 360 kg/m². Pontoons anchoring system with steel piles. Boats mooring system with fingers.
Floating infrastructures with pontoons, catways, gangways, anchoring and mooring system of the new marina.
Supply since 2005 of floating structures for the sea exibition area: 9400 square meters of floating piers up to 9m wide, slipways and floating platforms.
Floating harbour on the Temo river with floating pier dimensions m 180x4.70, free board 80 cm, overload 400 kg/m² for the protection of the floating harbour and for the mooring with fingers of boats up to 14 metres length. Floating platfom dimensions 20x19m. Anchoring system with piles and sliding devices. Full optional pump out station, aluminium frame structure with plexiglas shell, sewage suction terminal, oil suction terminal and oil tank.
Mooring infrastructures with floating pontoons, gangways, fixed quay and mini fingers in the Fosso Cagliana.
Floating harbour with 24 modules dimensions m 12x3, anchored with chains and deadweights giving protection to 220 berths. The breakwaters are used also for the mooring of fishing boats up to 20 metres in length. Floating pier dimensions m 325x6.00, free board 75 cm, overload 240 kg/m² to allow the access to the mooring pontoons. Anchoring system with sloping beams hinged to the quay. N 1 platform m² 432 and No. 3 platforms m² 216. Free board 75 cm, overload 240 kg/m². Anchoring system with chains and deadweights.
10 slipways dimensions m 15x30 and 4 slipways dimensions m 15x15 used for the launching of boats during the saling races at Olympic Games in Athens 2004.
Demountable modular floating crossing, to be installed annually on the recurrence of the fest of the Redentore, between "Zattere" and isle of Giudecca. Length 326m.
Surface about m² 450. Free board 70 cm, overload 660 kg/m². Anchoring system with rods. Wedge-shaped upstream side in order to deflect the shrubs. Downstream side with free board 20 cm and 100 kg/m² overload for launching of the rowing boats. Pre-arrangement for the superstructures installation.
Project, execution and installation of fixed gangway dimensions m 140x1,2, for the access to big boats berths (over 45 metres). Floating pier dimensions m 480x5, free board 50 cm, overload 150 kg/m² with fingers for the mooring of Speed Boats (displacement 9 tons). N 35 mooring piers for Patrol Boats (displacement 130 tons) dimensions m 35x5 each, free board 70 cm and overload 150.
floating harbour with 616 metres of pontoons, 288 metres of floating breakwaters, width 3.00 m. Full optional pump out station, aluminium frame structure with plexiglas shell, sewage suction terminal, oil suction terminal and oil tank.
Floating harbour with breakwaters: 11 modules dimensions m 20x4, N 5 modules dimensions m 20x3 and N 14 modules dimensions m 12x3 anchored with chains and deadweights giving protection to 590 berths, pontoons, service platforms and technological plants.
Floating harbour with breakwaters and pontoons. N 14 modules dimensions m 12x3, anchored with chains and deadweights giving protection to 650 berths. The breakwaters are used also for the mooring of boats up to 24 metres in length.
Floating infrastructures with floating pier dimensions m 57.5x5, free board 50 cm, overload 170 kg/m² for the separation of the port into two basins for the mooring of boats up to 20 metres in length. Anchoring system with chains and deadweights. Pump out station, sewage and oil suction tank.
380 metres of discontinuous floating pontoons type "FE/IG", width 2.35 metres. Free board 50 cm, overload 130 kg/m². Pontoons anchoring system with chains connected to deadweights. Boats mooring with fingers.
500 metress of discontinuous floating pontoons type "FE/IG", width 2.35 metres. Free board 50 cm, overload 130 kg/m². Pontoons anchoring system and boats mooring system with chains, deadweights and med moorings.